Showing posts with label oil extractor. Show all posts
Showing posts with label oil extractor. Show all posts

1/02/2012

Mityvac 7300 PneumatiVac Air-Operated Fluid Evacuator Review

Mityvac 7300 PneumatiVac Air-Operated Fluid Evacuator
Average Reviews:

(More customer reviews)
I bought this Mityvac 7300 because I usually get sick when I crawl under my cars to change the oil. Since my 2007 Huyndai Santa Fe has the oil filter on top of the engine I figured I was all set. I have a Nissan Frontier as well and that filter is accessible only from below unfortunately. Perhaps limited time under one vehicle only will let me escape without getting sick, I hoped.

The Mityvac's directions are not clear. The parts described in the verbiage are not pictured nor are they intuitive. You do not know what they are. For instance the instructions say to shut off a valve to build a vaccum in the unit, disconnect the air compressor and use the Mityvac in some remote location away from the air source. Great news, except the valve is neither described nor is it provided. For the life of me I cannot figure out how to make that feature work, but that was ok since I used the Mityvac where the air compressor was located.
Before my first use I bought a 25 foot coil of 1/4" plastic tubeing (which was intended for refrigerator ice maker hook up) at Home Depot as a previous reviewer suggested. The provided tubing is too short. I used about 12 foot of tubing. It worked beautifully, but you must insure that you have the tube all the way down to the bottom of the oil pan. I did not at first and did not fully evacuate the Santa Fe.
After evacuating the Santa Fe I turned to my Nissan Frontier and prepared to change its oil as well. That is when I ran into problems since I had not emptied the Mityvac before using it on the Frontier.
DO NOT COUNT ON THE OVERFLOW SHUTOFF TO WORK! I did and mine did not. Soon oil was all over the floor. Of course if a person is attentive and watches what is happening this would not happen. It remains to be seen if any injury occurred to the venture part when the oil got sucked down into it.
To clean the unit when I was done I used hot water with dish washing detergent. It worked well enough.
All in all I am pleased that I bought the Mityvac 7300. Except for the overflow protection failure, it worked quite well. I would not suggest changing oil wearing a tuxedo as some have implied could be done, however, unless you are into destroying tuxes. It simply is not THAT clean a procedure.


Click Here to see more reviews about: Mityvac 7300 PneumatiVac Air-Operated Fluid Evacuator



Buy NowGet 35% OFF

Click here for more information about Mityvac 7300 PneumatiVac Air-Operated Fluid Evacuator

Read More...

12/28/2011

Mityvac (MITMV7400) 7.3 Liter Fluid Evacuator Review

Mityvac (MITMV7400) 7.3 Liter Fluid Evacuator
Average Reviews:

(More customer reviews)
Now I don't have to elevate the front of my car, slide a drain pan under it, and scuff my knuckles breaking the drain plug loose anymore. Since my Hyundai Sonata has the oil filter topside, I don't have to lay on my hurtin' back for any reason when I change the oil now!
The first use, I wanted to see if it really emptied out the oil pan completely. So I popped the plug anyway after vacuuming out the oil with the Mityvac and not a drop came out of the drain hole! Very well pleased with its operation and would recommend this unit for anyone with fluid evacuation needs.

Click Here to see more reviews about: Mityvac (MITMV7400) 7.3 Liter Fluid Evacuator



Buy NowGet 39% OFF

Click here for more information about Mityvac (MITMV7400) 7.3 Liter Fluid Evacuator

Read More...

12/20/2011

Westward 1DXN2 Pneumatic Oil Extractor Review

Westward 1DXN2 Pneumatic Oil Extractor
Average Reviews:

(More customer reviews)
Liked the convenience of this product. The suction tubes get kinked very easy and begin leaking or prevent fluids from flowing through effectively. The overflow shut-off valve built in is worthless, since you have to monitor the fluid level as it rises to the top otherwise fluid escapes through the breather device and what a mess that becomes.

Click Here to see more reviews about: Westward 1DXN2 Pneumatic Oil Extractor



Buy Now

Click here for more information about Westward 1DXN2 Pneumatic Oil Extractor

Read More...

11/16/2011

Airpower America 2005 Oil Changing System Review

Airpower America 2005 Oil Changing System
Average Reviews:

(More customer reviews)
After playing with it for 2 hours, I finally realized it would not hold a vacuum and pump oil even though the instructions show that vacuum leaks are a problem with these units. Amazon accepted the return..

Click Here to see more reviews about: Airpower America 2005 Oil Changing System



Buy NowGet 14% OFF

Click here for more information about Airpower America 2005 Oil Changing System

Read More...

11/02/2011

Mityvac 7201 Fluid Evacuator Plus Review

Mityvac 7201 Fluid Evacuator Plus
Average Reviews:

(More customer reviews)
Works great. The dispensing feature is the key feature that sets this apart from other tools. It's makes it extremely easy to get the used oil into containers for recycling. No more funnels/towels for spills etc.
Granted, instructions may not be completely detailed, but this is a TOOL not an appliance. One shouldn't expect a wrench to come with 10 pages of instructions.
For those of you complaining about slow suction, here are some tips:
1) Warm up the engine.
2) Use the largest tube that fits down the dipstick
3) Remove the oil fill cap!!! Modern crankcases are airtight. If you don't remove the oil fill cap, then the only way for air to get in to displace the oil you're sucking out is the tiny space between the dipstick and the tube. You're forming a vaccuum that is working against the tool.
If you've imploded your tool, you've overpumped it, there was something else that was holding up your suction that you did not address.
If you doubt the speed, first practice using the new tool with plain water (clean unit only please: don't mix water with your oil) to get an idea of how everything works, and make sure you don't have any leaks in your connections.

Click Here to see more reviews about: Mityvac 7201 Fluid Evacuator Plus



Buy NowGet 31% OFF

Click here for more information about Mityvac 7201 Fluid Evacuator Plus

Read More...

10/26/2011

Astro Pneumatic (AST7351) 8 Gallon Air Operated Oil Changer Review

Astro Pneumatic (AST7351) 8 Gallon Air Operated Oil Changer
Average Reviews:

(More customer reviews)
bought a hand pump mityvac because i thought it would last, co-worker had a air operated design and it collapsed in on itself doing a hot oil change, i bought this astro 8 gallon oil changer and i am very happy with it performance, for the money, this is a best buy. Bob McGullam Autoscope Motorsports Dallas

Click Here to see more reviews about: Astro Pneumatic (AST7351) 8 Gallon Air Operated Oil Changer



Buy NowGet 39% OFF

Click here for more information about Astro Pneumatic (AST7351) 8 Gallon Air Operated Oil Changer

Read More...

10/21/2011

Mityvac 7400 7.3 Liter Fluid Evacuator Review

Mityvac 7400 7.3 Liter Fluid Evacuator
Average Reviews:

(More customer reviews)
I used this on my 2002 BMW and it seemed to work great, but the next time I went to use it- oil started coming out of the T-Handle where air normally is the only thing that escapes. I called the manufacturer, and they advised me that some synthetic oils (Mobil 1 in my case) can cause the seals in the lower part of the canister to degrade and will allow oil to bypass. They informed me that it would be covered under warranty- but Tool Topia is not working with me. When you call the line for returns, they have you leave a message- nobody ever calls you back either. I have called 4 times in the last 6 days- and nothing.
Don't buy this if you use synthetic oil, it won't last long enough for your second oil change.

Click Here to see more reviews about: Mityvac 7400 7.3 Liter Fluid Evacuator



Buy NowGet 28% OFF

Click here for more information about Mityvac 7400 7.3 Liter Fluid Evacuator

Read More...

9/24/2011

Hydro Turf OIL EXTRACTOR OIL01 Review

Hydro Turf OIL EXTRACTOR OIL01
Average Reviews:

(More customer reviews)
Solidly built, quality product. The stem is thin though, so pumping out a full engine of oil can take 45 mins. Trick I've learned is to get the oil pretty hot. Good idea anyhow and this unit can handle hot oil. But if you have warm oil its thick and is like sucking a milkshake out a straw. I pumped my twin engine boat with it. Warm oil took 45 mins in one engine. Hot oil in the other took 10. Dumping is easy and clean. Only thing missign is a cap for the log tube when stored. Easy to make your own.

Click Here to see more reviews about: Hydro Turf OIL EXTRACTOR OIL01



Buy NowGet 15% OFF

Click here for more information about Hydro Turf OIL EXTRACTOR OIL01

Read More...

8/29/2011

Mann-Filter W 719/30 Spin-on Oil Filter Review

Mann-Filter W 719/30 Spin-on Oil Filter
Average Reviews:

(More customer reviews)
The filter is one of the best, if not the best, filter for your VW. This is an OEM filter for 1.8t engines. 2 stars though for the outrageous price... find it cheaper elsewhere.

Click Here to see more reviews about: Mann-Filter W 719/30 Spin-on Oil Filter



Buy Now

Click here for more information about Mann-Filter W 719/30 Spin-on Oil Filter

Read More...

8/19/2011

Mann-Filter HU 719/6 X Metal-Free Oil Filter Review

Mann-Filter HU 719/6 X Metal-Free Oil Filter
Average Reviews:

(More customer reviews)
As other people have noted already, the MANN Filter is an OEM part. The Audi filter I replaced had the same imprint and looked identical.
I have used Mann filters for years and never had an issue with them.
Highly recommend to spend a few bucks extra to get the Mann filter over a cheap aftermarket product.

Click Here to see more reviews about: Mann-Filter HU 719/6 X Metal-Free Oil Filter



Buy Now

Click here for more information about Mann-Filter HU 719/6 X Metal-Free Oil Filter

Read More...

7/13/2011

HYDRO-TURF/VECTOR OIL EXTRACTOR OIL01 Review

HYDRO-TURF/VECTOR OIL EXTRACTOR OIL01
Average Reviews:

(More customer reviews)
I have used the oil extractor a number of times for changing oil on my boat and jet ski and it works great. Make sure you warm up the oil by running the engine before extracting it will allow the oil to move more easily into the vesel.

Click Here to see more reviews about: HYDRO-TURF/VECTOR OIL EXTRACTOR OIL01



Buy NowGet 17% OFF

Click here for more information about HYDRO-TURF/VECTOR OIL EXTRACTOR OIL01

Read More...

7/09/2011

Sta-Lube Fluid Oil Pump Review

Sta-Lube Fluid Oil Pump
Average Reviews:

(More customer reviews)
Replaced my rear diff and transfer case fluid so needed something to pump the gear fluid into it. This did the job perfect.

Click Here to see more reviews about: Sta-Lube Fluid Oil Pump



Buy NowGet 23% OFF

Click here for more information about Sta-Lube Fluid Oil Pump

Read More...

6/30/2011

Mann-Filter HU 816 X Metal-Free Oil Filter Review

Mann-Filter HU 816 X Metal-Free Oil Filter
Average Reviews:

(More customer reviews)
Same filter that BMW uses in the 2008 335i. Cheaper than the dealer and includes the drain screw crush washer. Don't know what else you could ask for.

Click Here to see more reviews about: Mann-Filter HU 816 X Metal-Free Oil Filter



Buy Now

Click here for more information about Mann-Filter HU 816 X Metal-Free Oil Filter

Read More...

6/19/2011

Mann-Filter HU 718/5 X Metal-Free Oil Filter Review

Mann-Filter HU 718/5 X Metal-Free Oil Filter
Average Reviews:

(More customer reviews)
This is the identical part as the filter that is bought from a Benz dealer and sold for over $20. Save a few bucks and get excellent quality, OEM filter.

Click Here to see more reviews about: Mann-Filter HU 718/5 X Metal-Free Oil Filter



Buy Now

Click here for more information about Mann-Filter HU 718/5 X Metal-Free Oil Filter

Read More...