Average Reviews:
(More customer reviews)I bought an 1134 from Amazon and it is not Made In USA. On to the coupler... there is nothing in the user manual about how it works. And good luck getting any help from Lincoln!
The coupler knurled section is tightened for shipping and you need to break it loose before you use it. It will go on and pull off the zerk until you pump grease and then it will not let go until you back off the knurled section. Don't try it on a zerk that is in a pocket that prevents you from getting your fingers on the knurled section or you may never get it off the zerk. When you have the coupler on a zerk as you rotate the knurled section you can feel the change in how it grips the zerk from locked on to loose and removable.
This feature? may be nice because you don't have to hold it on to the zerk and it will allow very high pressure. But if you need to use it in an area like a U-joint with a zerk that is deep in the spider, and you can't get to the knurled section of the coupler, you have to find a setting that will allow you to pull the coupler off and still seal to the zerk enough to push grease in and not just splooge all over. Pushing the coupler against the zerk while you pump does not seal at all.
Also, if you don't uncock the cartridge spring it pushes the oil portion of the grease out the nifty Lincoln Grease Gun Filler Pump Nipple on the head.
Click Here to see more reviews about: Lincoln Industrial 1134 16 Ounce Pistol Grease Gun with 18" Whip Hose and 6" Rigid Pipe
Get 12% OFF
No comments:
Post a Comment