Showing posts with label loctite. Show all posts
Showing posts with label loctite. Show all posts

6/15/2012

Permatex 59235 High Temperature Thread Sealant, 50 ml Tube Review

Permatex 59235 High Temperature Thread Sealant, 50 ml Tube
Average Reviews:

(More customer reviews)
I purchased a tube of this high temp thread sealant to use for an oil cooler installation. After following all the directions, I found the product didn't cure even at a week after application. Permatex claims the product is anaerobic and is cured on the inner threads while the excess on the outside should just be wiped off. Well, I take their word, install the oil cooler, and low and behold there is a slow leak from one of the 'sealed' threads. Never using this junk again.

Click Here to see more reviews about: Permatex 59235 High Temperature Thread Sealant, 50 ml Tube



Buy NowGet 26% OFF

Click here for more information about Permatex 59235 High Temperature Thread Sealant, 50 ml Tube

Read More...

5/25/2012

Permatex 56521 High Performance Thread Sealant, 50 ml Tube Review

Permatex 56521 High Performance Thread Sealant, 50 ml Tube
Average Reviews:

(More customer reviews)
used when installing a fuel pressure sender into a 7th supply line (for 7th injector) on my v6 pickup. Also used it when making air tight seals for my air compressor (overkill maybe, but works great!).
I'm trying to find other threads that need to be sealed just so I can use it more.

Click Here to see more reviews about: Permatex 56521 High Performance Thread Sealant, 50 ml Tube



Buy NowGet 32% OFF

Click here for more information about Permatex 56521 High Performance Thread Sealant, 50 ml Tube

Read More...

4/28/2012

Permatex 24300 Blue Surface Insensitive Threadlocker - 0.34 oz. Review

Permatex 24300 Blue Surface Insensitive Threadlocker - 0.34 oz.
Average Reviews:

(More customer reviews)
EDIT (March 2010): It's still holding tight after 1.5 years!
----
Brief summary: It's been working great for over 3 months on my bike.
Longer version:
The left crankarm on my 20+ year old bicycle was coming loose every month or so. The local bike shop said that there was nothing I could do short of tightening it and that the problem would get worse until I replaced the crankarm (a >$100 fix and lots of fun trying to locate an overpriced unused vintage part on auction sites).
I researched the problem online and came across a few mentions of people using Loctite threadlocker to fix the problem. I decided to get the Loctite 243 since it is resistant to grease. Unfortunately, the local shops only carried Loctite 242 (not oil resistant). Amazon carries Loctite 243, but it is through a third party vendor which charges as much as the item costs for shipping. Fortunately, I came across this Permatex threadlocker, which is also grease resistant (#24300) and is offered with free shipping. My impression is that this is the same exact product as the Loctite 243, but rebranded.
Over 3 months ago, I removed my crankarm and wiped the gunk off both the male and female threads. I applied Permatex to the male threads and screwed the crankarm back in. I let it sit undisturbed for 2 days to allow the stuff to fully cure. I have been riding my bike almost everyday since then (about 1000 total miles), but the crankarm has not come loose.
I'm so impressed by this product that I decided to use it on other screws that would periodically come loose (like on my rear rack). Everything has stayed in place.
If you're unfamiliar with these thread locking compounds, be aware that there are several versions of the Permatex and Loctite. The blue stuff is of medium strength; one should be able to break the seal using the force from hand tools. There's a regular and an oil-resistant version of the blue stuff (best to go with the oil-resistant if you have a choice). If you need something stronger, there's a red version. You'll need to heat that stuff with a blow torch to break the seal. A low strength purple version is also available.

Click Here to see more reviews about: Permatex 24300 Blue Surface Insensitive Threadlocker - 0.34 oz.



Buy Now

Click here for more information about Permatex 24300 Blue Surface Insensitive Threadlocker - 0.34 oz.

Read More...